Big Volume Simuation Low Temperature and low-pressure altitude Test Chambers
Applications
KOMEG Altitude Test Chambers combine temperature and altitude with optional humidity for simultaneous environment testing. Utilizing this low temperature and high altitude chamber users can control the temperature while subjecting the product to various altitudes up to 100,000 feet standard. This combination of elements allows precise simulation of any real-life conditions a product might face and allows for a wide range of test profiles to be performed.
Apart from its commercial and military aerospace applications, altitude chambers are used for automotive tests to simulate mountainous conditions and to test computers, electronics and packaging materials that may be used in that environment or shipped via air freight.
Features
Features
7 inch full color Touch Screen Controller
Ethernet monitoring & control
RS-232, RS-485 serial communications
Cable port diameter and location customized
Humidity water filtration system
Standard configuration:
Two sample holders; an observation window; φ25 or φ50 cable hole.
Optional parts:
Communication interface RS232 or RS485, logger, micro printer, remote temperature and humidity control system (including printers, communications software, computer), mobile casters.
Structure:
Overall structure, new test chamber designed very easy to operation and maintenance:
Water and electricity system separation design;
External humidifying design;
Three levels of overheat protection, easy access for refrigeration servicing, etc.
Material:
machines for sheet metal processing;
Tecumseh, Bock Compressor;
High quality electronic components (e.g. DANFOSS, ALCO, RANCO, SPORLAN, SAGINOMIYA, Schneider solenoid valve)
Altitude chamber working principle
Temperature and humidity range chart
Temperature and pressure range chart
Standards Implement and Met
GB11159-89 GB10590-89 GB15091-89
GB/T2423.25-1992 GB/T2423.26-1992 GJB150.0-86
Specifications
| Model | KU-504L |
| Inner Size (D*W*H)mm | 800D*700W*900H |
| Capacity(KW) | 11 |
| Chamber Volume(L) | 504 |
| Performance | Temp range | -40ºC~+150ºC,-140ºF~+302ºF |
| Temp constancy | ±0.5% |
| Temp deviation | ≥100ºC, ±3.0ºC(at constant pressure with empty load) |
| <100ºC, ±2.0ºC(at constant pressure with empty load) |
| Cooling rate | 0.7ºC~1.0ºC/min(Overall average) |
| Pressure range | Constant pressure ~1kPa |
| Pressure constancy | When ≥40kPa, ±2kPa, 4kPa~40pKa ±0.5kPa, when≤4kPa, ±0.1kPa |
| Depressurization rate | Constant pressure~1kPa≤30mins(Normal temp) |
| Pressure recovery rate | 10kPa/Min(adjustable) |
| Material | Exterior material | Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate |
| Interior material | Stainless steel(SUS304) |
| Pressurized parts | High quality steel plate(Rust proof & Plastic spray treated) |
| Insulation material | High quality glass wool |
| Cooling System | Compressor | Semi-Hermetic Compressor |
| Cooling Mode | Water cooled |
| Temp regulating method | Balanced Temperature & Humidity Control System(BTHC) |
| Pump | Rotary vane type vacuum pump |
| Heater | Iron-chrome wire heater |
| Sight window | Circular viewing glass incorporating heat generator |
| Temp Sensor | Pt-100 |
| Controller | Touch Screen Controller |
| Safety Devices | Over pressure, over heat and over current protection for compressor, over temp. protection, over load protection for blower,Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm |
| Standard Accessory | Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2 |
| Power | AC380V/50Hz, 3Phase 5 wires+ Ground Wire. |
| Note: 1. We reserve the right to change specifications without prior notice; 2. Customized sizes and configurations available |
Product Tags:
|
|
Low Temperature Low Pressure Altitude Test Chambers Big Volume Simuation Images
|
